Same-Day Built-In Oven Repair in South Pasadena & Surrounding Cities
Certified technicians, all major brands, professional service
Real Repairs by Our Technicians
Brands We Service
Our certified technicians are trained to repair appliances from all major brands
Our Samsung fridge stopped cooling overnight. Called Max Fixing and they sent someone out same day. The technician was professional, explained everything clearly, and had us back up and running in under 2 hours. Pricing was fair and transparent. Highly recommend!
Washer was making a horrible noise. The tech arrived on time, diagnosed the issue quickly (worn bearing), and completed the repair efficiently. Very knowledgeable and reasonably priced. Will definitely use them again.
Had an issue with our GE dishwasher not draining. Max Fixing came out the next day, fixed it within an hour, and cleaned up everything. The technician was courteous and explained what caused the problem. Great service!
Our LG dryer stopped heating. Called Max Fixing and they were able to fit us in the same day. The repair was done professionally and the price was exactly what they quoted over the phone. Very satisfied with the service.
Excellent service! Our Whirlpool refrigerator was leaking water. The technician arrived within the scheduled window, quickly identified the problem, and had the parts needed in his truck. Fixed it on the spot. Very pleased!
Called them for our Maytag washer that wouldn't spin. They came out same day, tech was friendly and professional. Fixed the issue and gave us maintenance tips to prevent future problems. Fair pricing too. Would recommend!
Our KitchenAid oven stopped working right before Thanksgiving. Max Fixing saved the day! Same-day service, professional technician, and reasonable rates. We were so relieved. Thank you!
Had them fix our dishwasher last year and they did such a great job we called them again for our fridge. Always reliable, professional, and fair pricing. They're our go-to for all appliance repairs now.
Very responsive and professional. Our freezer stopped working and they came out within hours. The technician was knowledgeable and explained everything clearly. Repair was done quickly and hasn't had any issues since.
Marengo Avenue and the side streets off Fremont in 91030 are lined with 1920s Craftsman bungalows where someone dropped a KitchenAid double wall oven into a kitchen remodel 10-12 years ago. Those units are aging out and starting to act up — upper and lower cavities running at different temps, control boards throwing F3 and F9 error codes. South Pasadena is a quick run off the 110 for us. Same-day service is available for most calls. Usually there within 2 hours of booking.
Housing stock in 91030 skews old. Pre-WWII Craftsman and Tudor Revival homes dominate the blocks around Meridian Avenue and El Centro Street — kitchens that were gut-renovated but never structurally opened up. Wall ovens in these homes are almost always fitted into existing cabinetry with tight clearances. Pulling a unit for service takes real care; you can't just yank it out. The 240V wiring in a lot of these installs also hasn't been looked at since the remodel. South Pasadena sits between the 110 and the 210, and the neighborhood character shifts block by block. The flatter streets near Fair Oaks run middle-income households with Bosch and LG appliances. Up toward Monterey Road and the edges of Prospect Park, you're in higher-income territory — Sub-Zero refrigerators in the kitchen, Thermador wall ovens stacked in a built-in column. Those Thermador units are exceptionally well-built, but they need a technician who's actually worked on one before. The tolerances are tighter, the error codes are less straightforward, and the parts can't be sourced at a generic appliance warehouse. Rental inventory is another piece of the picture. South Pasadena has older duplexes and converted single-family homes where landlords installed entry-level KitchenAid or GE Profile wall ovens a decade ago. Those see harder use and less maintenance. A common complaint: the self-clean cycle triggering a thermal fuse failure that takes both cavities offline at once. That's a one-visit fix, but it catches people off guard when it happens mid-week before a dinner party.
Common Built-In Oven Issues in South Pasadena
One oven cavity stops heating while the other works normally
Each compartment has its own bake and broil heating element, plus a separate thermostat. On KitchenAid models the lower bake element tends to fail first — it runs more hours and takes more heat cycling. Diagnosing which element failed is fast; swapping it out in a tight cabinet install in South Pasadena adds time. Budget 90 minutes minimum for these jobs. If the control board is also logging fault codes alongside the element failure, that usually surfaces in the same visit — no second call needed.
Upper and lower ovens read the same temp but cook differently
This usually points to a convection fan motor losing RPM in one cavity, or the hidden bake element — the one under the oven floor — cycling unevenly. Thermador units, common in the higher-income homes on Monterey Road, develop this after 8-10 years of use. The control board shows a stable temperature reading while actual heat distribution drifts badly. A technician can verify with a thermal probe in 15 minutes. South Pasadena's older electrical panels also occasionally deliver slightly uneven voltage to dual-circuit appliances — worth checking if the symptoms are intermittent or time-of-day dependent.
Door won't hold closed or swings open slightly during cooking
The door hinge assembly on wall ovens wears faster than people expect — heavier doors, opened dozens of times per day. Bosch wall ovens use spring-loaded hinges that lose tension gradually. Even a 3-4mm gap at the seal throws off bake temps noticeably. New hinge arms plus a fresh door gasket fix the problem cleanly. Leaving it causes the control board to overcompensate on heat, which shortens its life. This shows up a lot in South Pasadena's older renovated kitchens where the original cabinet opening wasn't sized precisely for the replacement unit — the door carries more stress from day one.
Frequently Asked Questions
How fast can you get to South Pasadena for wall oven repair?▼
We run through the San Gabriel Valley daily — South Pasadena is an easy pull off the 110 from our route. Typical window is 2 hours from your call. Evening appointments available most days. Call (323) 870-4790 or schedule online and we'll confirm the slot same-day.
Do you work on Thermador and KitchenAid double wall ovens?▼
Both are the most common brands we see in South Pasadena. On Thermador we mostly deal with convection fan motors and control board failures — the E1 and E6 codes come up often after the 10-year mark. KitchenAid calls are usually heating elements or door latch assemblies. We stock common parts for both and carry them on the van.
What does wall oven repair typically cost, and how quickly can the part be sourced?▼
Most repairs land between $150 and $380 depending on what failed. Control board replacements sit at the top of that range. Heating elements and thermal fuses are at the low end. We diagnose on the first visit and either have the part on the van or can source it next-day. Same-day service available — call (323) 870-4790 to check morning availability.
Can you work on a built-in double oven without damaging the cabinetry?▼
South Pasadena homes are exactly the situation where this comes up. Craftsman kitchens with original millwork, or newer renovations that preserved the trim — either way, pulling a wall oven wrong leaves marks. We bring the right tools: oven removal straps, cabinet padding, and a second set of hands when the unit runs heavy. Bosch and Thermador built-ins especially need careful extraction because the trim kit clips into the cabinet face. We've done enough of these in 91030 to know what to protect.
Need Built-In Oven Repair in South Pasadena?
Same-day service available. Call now for a free estimate.
(888) 608-6404