Professional Appliance Repair Service

Same-Day Ice Maker Repair in Granada Hills & Surrounding Cities

Certified technicians, all major brands, professional service

Same-Day Service
20+ Years Experience
Fully Insured
Upfront Pricing
(888) 608-6404
4.8(3,400+ reviews)

Real Repairs by Our Technicians

Last updated July 2026

O'Melveny Park sits at the northern edge of the 91344 zip, and the ranch homes spreading south from Sesnon Boulevard through the heart of Granada Hills are running refrigerators in kitchens that were designed before dishwashers were standard — let alone icemakers. LADWP water hardness in this corridor runs 200 to 280 parts per million depending on the seasonal supply blend, and that mineral load does quiet, steady damage to ice maker fill valves over months and years. A Kenmore side-by-side that moved in with a family ten years ago is probably producing half the ice it used to, or none at all, because calcium has gradually choked the solenoid orifice in the water inlet valve down to a trickle. The area near Zelzah Avenue and the Porter Ranch boundary sees the same pattern — older GE and Whirlpool units in 1970s homes where nobody thought to flush the water line in a decade. Call (660) 999-9960 and we can usually be on-site the same day.

Most of the residential stock in Granada Hills went up between 1955 and 1975 — standard postwar San Fernando Valley construction, single-story ranch floor plans with tight kitchen alcoves and original copper supply lines that have accumulated real mineral deposits. In 91344, those supply lines feed directly into refrigerator fill valves that were already working with minimal clearance from the factory. Over in 91394, closer to the Chatsworth border off Rinaldi Street, you find a mix of slightly later builds — some early 1980s construction — but the water chemistry is essentially identical. Ambient kitchen temps during July and August regularly push past 90°F in single-story homes without central air conditioning, which forces refrigerator compressors to run longer cycles and stresses ice maker thermostats that were calibrated for moderate conditions. Tight appliance bays in these homes also mean ice maker access requires removing shelving and sometimes the entire freezer drawer assembly before a technician can reach the water line connection — something to budget time for on older Frigidaire and Amana units.

Common Ice Maker Issues in Granada Hills

Mineral-Clogged Water Inlet Valve — The Most Common Granada Hills Ice Maker Call

Small, hollow ice cubes are the first sign. Then production slows to a few cubes per cycle. Then nothing. The water inlet valve — a dual-coil solenoid mounted at the back of the refrigerator — has a plastic orifice that calcifies fast under 91344's water conditions. On a standard Kenmore or GE side-by-side, the orifice opening is roughly 1.5mm; mineral deposits can cut that to under 0.5mm over three to five years of hard water exposure. Replacement valves for these models run $22 to $55 in parts, and the swap takes 30 to 45 minutes once the refrigerator is pulled out. We carry the most common GE WR57X10032 and Kenmore equivalent valves on the truck, so this usually gets handled in one visit without a parts delay.

Frozen Fill Tube Blocking the Ice Mold

The fill tube is the small plastic or rubber line that delivers water from the back wall of the freezer into the ice mold. When the freezer thermostat runs a degree or two colder than spec — common on older units where the calibration has drifted — the standing water in that tube freezes solid between fill cycles. The ice maker then tries to fill, gets nothing, and eventually throws an error or just stops. Samsung french-door models have a documented pattern of ice bridging in this exact spot, especially in warm kitchens where the freezer door gets opened frequently. Clearing the blockage takes 20 minutes; fixing the underlying thermostat drift or confirming the defrost heater is cycling correctly adds another 30. Total repair time is typically under an hour.

Optical Sensor Failure Causing False 'Bin Full' Signal

Newer refrigerators replaced the old wire bail arm with an infrared optical sensor that beams across the ice bin and shuts off production when ice interrupts the signal. Mineral film from Granada Hills tap water settles on the sensor eye and scatters the beam even when the bin is empty — so the ice maker reads "full" and stops producing indefinitely. This shows up frequently on Samsung and LG units built after 2012 and has a straightforward fix: clean the sensor lens with a diluted white vinegar solution and test the cycle. If the sensor housing itself is cracked or the emitter has failed, replacement parts run $45 to $90 depending on the model. Our contractor license number is #1136541 if your property manager needs documentation for the service record. Diagnosis takes about 15 minutes.

Ice Maker Module Replacement — When Repair Math Doesn't Work

After eight to twelve years, the ice maker module itself — motor, ejector blades, ice mold thermostat — wears to the point where chasing individual component failures costs more than a module swap. A replacement module for a Whirlpool or Amana side-by-side runs $85 to $150 in parts; installation takes 50 to 70 minutes. For GE top-freezer units, the modular design makes this especially clean — the whole assembly unplugs and drops out in about ten minutes. That total repair cost of $150 to $250 pencils out easily against a new refrigerator when the rest of the unit — compressor, condenser coil, door gaskets — is still in decent shape. If the fridge is under 12 years old and cooling correctly, module replacement almost always makes more sense than replacement.

Auger Motor Failure — Ice Dispenser Grinding or Dead

The auger motor drives the helical screw that moves ice from the storage bin forward to the dispenser chute. When it starts failing, you hear grinding during dispenser use, or the dispenser runs but no ice comes out. Whirlpool and Maytag side-by-sides from the 2005-2016 production run have an auger motor that's a recognized weak point — the bushings wear and the motor eventually seizes. Parts for a Whirlpool W10757851 replacement motor run $50 to $80; the repair requires removing the ice bin and door inner panel, about 60 to 90 minutes of labor. Catching it at the grinding stage matters — a seized auger can strip the plastic drive coupling, which turns a $70 motor swap into a $120 parts job. Same-day service is usually available for this repair in Granada Hills.

Frequently Asked Questions

How fast can you get to Granada Hills for ice maker repair?

Granada Hills sits right in our northwest Valley coverage corridor — we reach most of 91344 and 91394 off the 118 in under 25 minutes from our nearest technician's position. Call before noon and same-day service is the norm, often with a 2-hour arrival window. School traffic on Balboa and Rinaldi can push that by 10 to 15 minutes during afternoon hours, but we'll give you a real estimate when you call, not a vague half-day range. Dial (660) 999-9960 and we'll check the current schedule and confirm your slot.

What does ice maker repair cost in Granada Hills?

Simple fixes — a clogged water inlet valve, a stuck bail arm, sensor cleaning — typically run $85 to $150 including parts and labor. A full ice maker module replacement on a Whirlpool, GE, or Frigidaire usually lands between $150 and $260 depending on the model and how accessible the compartment is. We don't tack on a separate diagnostic fee if you move forward with the repair on the same visit. Pricing varies based on brand and whether the refrigerator needs to be partially disassembled to reach the water line connection — which happens more often in the narrow kitchen layouts common in 91344's older ranch homes.

Do you work with landlords and property managers in Granada Hills?

Yes — a solid share of our Granada Hills calls come from rental properties, particularly in the denser sections of 91344 near Chatsworth Street. We can bill management companies directly, document every repair with photos and a written service report, and note our contractor license #1136541 on any paperwork the property owner needs for their records. Tenants don't need to coordinate the payment — we work that out with the landlord. When scheduling, just let us know if a tenant needs to be home and we'll work around their availability.

My ice maker is still under the manufacturer warranty — can you still help?

If the unit is within the manufacturer warranty window — typically one year parts and labor, sometimes five years on sealed-system components — we'll tell you honestly whether to call the manufacturer first. Samsung and GE both have extended warranty programs that can cover ice maker components past the base period. Outside those windows, we work with most major home warranty companies operating in LA County — American Home Shield, Choice, First American — and know their documentation requirements. Have your contract info ready when you call (660) 999-9960 and we'll confirm the fastest path.

How do I know whether to repair or replace the ice maker unit?

If the refrigerator is cooling correctly and is under 12 years old, repair almost always wins the math. Ice maker modules on Frigidaire, Whirlpool, and GE units are modular by design — they swap out without touching the rest of the appliance. The calculation shifts when the compressor is also struggling, the evaporator coil has a refrigerant leak, or the unit is past 15 years. We give a straight answer on this when we diagnose — there's no upside for us in recommending unnecessary work. If the repair doesn't make economic sense, we'll say so.

What other neighborhoods near Granada Hills do you cover?

From Granada Hills we cover Northridge, Porter Ranch, Chatsworth, Sylmar, Mission Hills, and San Fernando to the east. To the south we run through Reseda and Canoga Park regularly. Evening and weekend appointments are available for residents who can't do weekday daytime — call (660) 999-9960 to check what's open in the current schedule. Most calls across this whole northwest Valley corridor stay within our same-day window as long as you reach us before early afternoon.

Need Ice Maker Repair in Granada Hills?

Same-day service available. Call now for a free estimate.

(888) 608-6404

What Our Customers Say

Real reviews from Google Business Profile

View all reviews on Google
J
Jennifer Rodriguez
2 weeks ago

Our Samsung fridge stopped cooling overnight. Called Max Fixing and they sent someone out same day. The technician was professional, explained everything clearly, and had us back up and running in under 2 hours. Pricing was fair and transparent. Highly recommend!

M
Michael Thompson
1 month ago

Washer was making a horrible noise. The tech arrived on time, diagnosed the issue quickly (worn bearing), and completed the repair efficiently. Very knowledgeable and reasonably priced. Will definitely use them again.

S
Sarah Martinez
1 month ago

Had an issue with our GE dishwasher not draining. Max Fixing came out the next day, fixed it within an hour, and cleaned up everything. The technician was courteous and explained what caused the problem. Great service!

D
David Chen
2 months ago

Our LG dryer stopped heating. Called Max Fixing and they were able to fit us in the same day. The repair was done professionally and the price was exactly what they quoted over the phone. Very satisfied with the service.

A
Amanda Williams
2 months ago

Excellent service! Our Whirlpool refrigerator was leaking water. The technician arrived within the scheduled window, quickly identified the problem, and had the parts needed in his truck. Fixed it on the spot. Very pleased!

R
Robert Johnson
3 months ago

Called them for our Maytag washer that wouldn't spin. They came out same day, tech was friendly and professional. Fixed the issue and gave us maintenance tips to prevent future problems. Fair pricing too. Would recommend!

L
Lisa Anderson
4 months ago

Our KitchenAid oven stopped working right before Thanksgiving. Max Fixing saved the day! Same-day service, professional technician, and reasonable rates. We were so relieved. Thank you!

J
James Parker
6 months ago

Had them fix our dishwasher last year and they did such a great job we called them again for our fridge. Always reliable, professional, and fair pricing. They're our go-to for all appliance repairs now.

P
Patricia White
7 months ago

Very responsive and professional. Our freezer stopped working and they came out within hours. The technician was knowledgeable and explained everything clearly. Repair was done quickly and hasn't had any issues since.

(888) 608-6404
Granada Hills Ice Maker Repair & Surrounding Cities | Same-Day Service 2026 | Max Fixing