Same-Day Range Repair in Culver City & Surrounding Cities
Certified technicians, all major brands, professional service
Real Repairs by Our Technicians
Brands We Service
Our certified technicians are trained to repair appliances from all major brands
Range Repair in Nearby Cities
Our Samsung fridge stopped cooling overnight. Called Max Fixing and they sent someone out same day. The technician was professional, explained everything clearly, and had us back up and running in under 2 hours. Pricing was fair and transparent. Highly recommend!
Washer was making a horrible noise. The tech arrived on time, diagnosed the issue quickly (worn bearing), and completed the repair efficiently. Very knowledgeable and reasonably priced. Will definitely use them again.
Had an issue with our GE dishwasher not draining. Max Fixing came out the next day, fixed it within an hour, and cleaned up everything. The technician was courteous and explained what caused the problem. Great service!
Our LG dryer stopped heating. Called Max Fixing and they were able to fit us in the same day. The repair was done professionally and the price was exactly what they quoted over the phone. Very satisfied with the service.
Excellent service! Our Whirlpool refrigerator was leaking water. The technician arrived within the scheduled window, quickly identified the problem, and had the parts needed in his truck. Fixed it on the spot. Very pleased!
Called them for our Maytag washer that wouldn't spin. They came out same day, tech was friendly and professional. Fixed the issue and gave us maintenance tips to prevent future problems. Fair pricing too. Would recommend!
Our KitchenAid oven stopped working right before Thanksgiving. Max Fixing saved the day! Same-day service, professional technician, and reasonable rates. We were so relieved. Thank you!
Had them fix our dishwasher last year and they did such a great job we called them again for our fridge. Always reliable, professional, and fair pricing. They're our go-to for all appliance repairs now.
Very responsive and professional. Our freezer stopped working and they came out within hours. The technician was knowledgeable and explained everything clearly. Repair was done quickly and hasn't had any issues since.
Sony Pictures sits three blocks from some of the most consistent range-repair calls we get in the 90230 zip — older Bosch slide-ins in 1950s bungalows along Harter Avenue where the gas supply lines are narrow and original. The KitchenAid dual-fuel units in the remodeled homes near Blair Hills run hard year-round. A broken spark igniter or a gas valve that won't open all the way isn't a minor inconvenience when dinner's on the line. Call (323) 870-4790. Usually on-site within 2 hours.
Most of the service calls in 90232 come from the post-war tract housing between Jefferson Boulevard and Washington Place — homes built 1948 to 1965, gas stub-outs that have been replumbed at least once, kitchens where a slide-in range fits tight against cabinetry. These aren't huge kitchens. Getting a 36-inch range out for a control board swap means unscrewing anti-tip brackets, disconnecting the flex line, and sometimes pulling the adjacent dishwasher first. Fox Hills has a heavier condo concentration with stacked layouts and restricted parking, which affects how we stage the van and bring parts in. Street parking on Buckingham Parkway on a weekday takes planning. Blair Hills runs newer construction with 36-inch ranges — Thermador and Viking are common up there, and those homes have the vented hoods and gas pressures to match. The range calls up on Alvern Circle are a different job than the ones we get down near the Expo Line. Culver City's proximity to the coast — Marina del Rey is four miles west — means the humidity swings enough to accelerate corrosion on igniter electrodes and burner caps. We see it more here than we do in the Valley.
Common Range Issues in Culver City
Gas Igniter Failure in Aging Culver City Bungalows
The spark igniter modules on older Bosch and KitchenAid gas ranges corrode faster in homes near Ballona Creek where humidity sits higher than the rest of the area. A clicking burner that won't light usually means the igniter electrode is cracked or the igniter switch has failed internally — sometimes both on the same burner after the electrode arcs to the wrong ground point. On Bosch 500-series units, the igniter harness connector also loosens from heat cycling over time, which produces an intermittent click even after you replace the electrode. We carry OEM igniter assemblies for both brands on the truck, and the repair typically runs under two hours including testing all four burners.
Oven Not Reaching Temperature — Bake Element or Gas Valve
Thermador dual-fuel ranges in the Blair Hills remodels show a recurring pattern: the oven bake element burns out at the connection point, usually after 6-8 years of heavy use. You'll see uneven browning first, then the oven stops holding temperature entirely. On gas-only units, a weak or intermittent gas valve solenoid produces the same symptom — oven starts, then drops 75 degrees mid-cycle. The solenoid coil resistance drifts out of spec and the valve partially closes under heat. Both repairs are same-day if we have the part, which we usually do for Thermador and KitchenAid.
Control Board Errors on Samsung and LG Slide-Ins
The newer Samsung and LG slide-in ranges popular in the Fox Hills condos throw SE or F9 error codes when the control board's relay contacts pit from power fluctuations. Culver City's grid near the Expo Line corridor sees occasional voltage spikes. A failed control board can lock out the surface burners entirely. Replacement boards run $180-$340 depending on the model. Before condemning the board, we always check the ribbon cable connections — on the LG LSE4613 series, a loose ribbon mimics a dead relay and has fooled more than one tech into ordering an unnecessary part.
Frequently Asked Questions
How fast can you get to Culver City for Range repair?▼
From our West LA staging point, Culver City is typically 15-25 minutes depending on the 405/10 interchange. Fox Hills and Blair Hills we reach even faster via Sepulveda. Call (323) 870-4790 before noon and same-day service is almost always available. Evening slots open too — useful if you can't take time off work.
Do you repair Thermador and KitchenAid ranges specifically?▼
Yes — Thermador Pro Harmony and KitchenAid commercial-style units are two of our most common jobs in Culver City. Thermador usually needs gas valve or convection fan work; KitchenAid calls are often igniter switches or surface element issues. We also handle Bosch, Viking, Samsung, and LG. Having the right service manuals matters on Thermador — the Star Burner assembly has a different igniter configuration than most techs expect the first time they open one up.
What does a range repair typically cost, and do you charge for the diagnosis?▼
Diagnosis runs $75, applied toward repair if you proceed. Most igniter and heating element jobs land between $150-$280 parts and labor. Control board replacements run higher — figure $280-$480 all-in on a Samsung or LG depending on parts availability. We give you the exact number before touching anything. Schedule online or call (323) 870-4790 for same-day availability.
Can you work on gas ranges in older Culver City homes with original gas lines?▼
That's most of what we do in the 90230 and 90232 zips. Older flex connectors, narrow stub-outs, manual shutoffs that haven't moved in 20 years — familiar territory. We carry a calibrated gas pressure gauge and test supply pressure at the range before diagnosing any burner or oven issue. Low inlet pressure causes symptoms that look exactly like a bad gas valve, and replacing the valve won't fix it. Getting that step right saves you money.
Need Range Repair in Culver City?
Same-day service available. Call now for a free estimate.
(888) 608-6404